Makita Combi Drill Top 5 Maintenance Tips

Maintaining your Makita Combi Drill is essential to ensure its longevity and optimal performance. Regular maintenance not only extends the lifespan of your tool but also ensures safety during operation. By following some simple maintenance tips, you can keep your Makita Combi Drill in top condition, ready to tackle any task with efficiency and precision. Let’s explore some key maintenance practices to keep your combi drill operating at its best.

Why Branded Tools?

Branded tools hold a significant importance due to their superior quality, reliability, and comprehensive support. Renowned brands like Makita invest in stringent quality control measures, ensuring their products meet high standards for performance and durability. This reliability is further reinforced by warranties and access to customer support services, providing users with peace of mind and assistance in case of any issues. Moreover, branded tools often offer compatibility with a wide range of accessories and parts, along with innovative features and technologies, enhancing their versatility and efficiency. While branded tools may entail a higher initial cost, their long-term value, resilience, and ease of maintenance make them indispensable for both professionals and DIY enthusiasts alike.

Top 5 Makita Combi Drill Maintenance Tips

Maintaining your Makita Combi Drill is vital for its longevity and performance. Regularly check for wear, clean it to remove debris, lubricate moving parts, tighten screws, and store it in a dry place. These simple steps will keep your drill in top shape, ensuring reliable performance whenever you use it.

Regular cleaning for your Makita Combi Drill

Regular cleaning of your Makita combi drill after each use is crucial for its maintenance and longevity. Here’s a simple routine to follow:

• Preparation: Before you start cleaning, ensure that the drill is turned off and disconnected from any power source. This is important for safety reasons.
• Wipe Down: Take a clean, dry cloth and gently wipe down the exterior of the drill. Start from the top and work your way down, paying special attention to areas where dust, debris, or residues tend to accumulate, such as the chuck and vents.
• Cleaning the Chuck: The chuck is a critical component that should be kept clean to ensure smooth operation. You can use a small brush, such as a toothbrush, to gently remove any debris or buildup from the chuck jaws. Be careful not to force anything into the chuck, as this could damage it.
• Cleaning the Vents: The vents help keep the drill’s motor cool during operation. Use a brush or compressed air to remove any dust or debris that may be blocking the vents. This will help maintain proper airflow and prevent overheating.
• Inspect for Residues: While cleaning, keep an eye out for any residues, such as grease or oil, that may have accumulated on the exterior of the drill. If you notice any, you can use a mild cleaner or solvent on a cloth to gently remove them. Be sure to follow up with a clean, dry cloth to wipe away any remaining residue.

Makita Combi Drill Chuck Maintenance

Chuck maintenance is an essential aspect of caring for your Makita Combi Drill. Here’s how you can ensure it stays in top condition.

• Regular Inspection: Make it a habit to inspect the chuck regularly for any signs of wear or damage. Look for worn-out teeth or any looseness in the chuck mechanism.
• Cleaning: Keep the chuck jaws clean to ensure smooth operation. You can use a small brush, like a toothbrush, to gently remove any debris or build-up from the chuck jaws. Avoid using harsh chemicals that could damage the chuck.
• Lubrication: Periodically lubricate the chuck jaws with a light machine oil to maintain smooth movement. Apply a small amount of oil onto a cloth or directly onto the chuck jaws, then rotate the chuck to distribute the lubricant evenly. This helps prevent friction and ensures the chuck operates properly.

Makita Combi Drill Battery Care

Caring for the battery of your cordless Makita Combi Drill is essential for maintaining its performance and longevity. Here are some tips to ensure proper battery care. You might like to have a look to our blog, 5 Tips for Extending the Life of your Makita Batteries.

• Charging Before Use: Before using the drill, ensure that the battery is fully charged. This ensures maximum power and performance during operation.
• Storage Conditions: When the drill is not in use, store the batteries in a cool, dry place away from direct sunlight and extreme temperatures. Avoid storing them in environments that are too hot or too cold, as this can affect battery performance.
• Avoid Overcharging: Overcharging the batteries can lead to decreased battery life. Once the battery is fully charged, remove it from the charger to prevent overcharging. Most modern chargers have built-in mechanisms to prevent overcharging, but it’s still a good practice to remove the battery once charging is complete.
• Avoid Full Discharge: Similarly, avoid fully discharging the batteries before recharging them. Lithium-ion batteries, commonly used in cordless drills, perform best when they are kept charged between 20% and 80% capacity. Allowing the battery to fully discharge frequently can reduce its lifespan.

Makita Combi Drill Wear and Tear

Regularly inspecting your Makita Combi Drill for signs of wear and tear is crucial for ensuring its safety and longevity. Here’s how you can effectively check for and address any issues.

• Frayed Cords: Check the power cord of your corded drill for any fraying or damage. Frayed cords can pose a safety hazard and should be replaced immediately. Avoid using the drill if you notice any damage to the cord.
• Cracked Housing: Inspect the housing of the drill for any cracks or damage. Cracked housing can compromise the structural integrity of the drill and may affect its performance. If you notice any cracks, discontinue use and have the drill inspected by a qualified technician.
• Loose Parts: Check for any loose screws, bolts, or other components on the drill. Loose parts can affect the drill’s operation and may lead to further damage if not addressed promptly. Use a screwdriver or wrench to tighten any loose fasteners as needed.

Makita Combi Drill Storage

Proper storage is essential for maintaining the condition of your Makita Combi Drill and ensuring its longevity. Here’s how to store it effectively.

• Dry Environment: Store the drill in a dry place to prevent moisture from causing corrosion or damage to the internal components. Avoid storing it in areas prone to humidity, such as basements or garages, if possible.
• Avoid Extreme Temperatures: Keep the drill away from extreme temperatures, both hot and cold, as these can affect the performance and lifespan of the tool. Ideally, store it in a temperature-controlled environment.
• Use a Carrying Case or Toolbox: Invest in a carrying case or toolbox designed specifically for your drill model. These cases provide protection from impacts, dust, and other elements when the drill is not in use. Make sure the case is sturdy and has compartments to organise accessories like drill bits and batteries.
• Secure Placement: When storing the drill, ensure it is placed securely in its carrying case or toolbox to prevent it from falling or being knocked over. This helps minimise the risk of damage during storage.

Our Top Sellers for Makita Combi Drill

Makita DHP482Z LXT 18V Cordless Combi Drill (Body Only)

• Variable 2-speed, reversible motor
• Incorporates Makita’s new battery protection system that provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life
• Extreme protection technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
• 21 clutch settings deliver up to 480 in. Lbs. of torque
• All metal gears for more efficient power transmission
• Ultra-compact design (only 7-3/4″ long)
• Twin led jobs light with pre-glow and after-glow functions
• Improved ergonomic soft rubber grip design for vibration absorption.

Makita DHP484Z 18V LXT Brushless Combi Drill (Body Only)

• Brushless motor
• Electric brake
• 2 mechanical gears.
• Variable speed control by trigger
• Forward/reverse rotation
• LED job light
• Compact Overall Length of 182mm
• Keyless Chuck
• Aluminium Gear Housing
• All metal gear construction
• Ergonomic soft grip
• Belt clip
• Torque Settings: 21 + Drill

Makita DHP486Z 18V LXT Brushless Combi Drill (Body Only)

• Compact overall length of only 178mm for use in narrow work spaces
• High powered Brushless Motor produces 130Nm peak torque
• High durability aluminium gear housing
• Mechanical 2 speed gearing with all metal gear construction
• Forward / reverse rotation
• Single sleeve keyless chuck allows for easy bit installation/removal by one hand
• Electric brake
• Variable speed control by trigger
• Best possible ergonomic handle for drill-driver applications
• LED job light
• Belt clip
• XPT – Extreme Protection Technology

FAQ

Can I use water to clean my Makita Combi Drill?

No, it’s not recommended to use water to clean your Combi Drill, especially on electrical components. Instead, use a clean, dry cloth to wipe down the exterior and remove any dirt or residues.

How do I know when to replace the chuck on my Makita Combi Drill?

Inspect the chuck regularly for signs of wear or damage, such as worn-out teeth or looseness in the chuck mechanism. If you notice any significant issues, consider replacing the chuck to ensure smooth operation.

Are Branded Tools worth the extra cost?

While branded tools may have a higher upfront cost, they often provide better long-term value due to their durability, reliability, and availability of support services. Investing in a quality tool can save you money in the long run by avoiding frequent replacements or repairs.

At Toolden, we offer a wide range of Makita Combi Drills to suit a wide range of domestic and commercial applications.

Unsure of which to go for? Need a bit of help with your order? Our new help centre has a wide range of helpful articles and guides!
If you have any additional queries, please do not hesitate to contact us at 01358 726719 or by email at admin@toolden.co.uk.